Suitable for control of 12V or 24V DC RGB LED strip.Output Wattage: 12V: <216W, 24V: <432W.Precise touch colour selection wheel.18 Preset colour changing functions.Adjustable brightness and colour change speed.Remote control with 5m range (3 x AAA batteries required)
Kit includes:.24V 0.5m/1.64ft Power leads x 2.End caps x 2.Heat shrink sleeves x 4.Sealant tube x 1.Fixing clips x 20.Fixing screws x 20.Requires Soldering
12V DC RGB Flexible LED Strip Light/
RGB colour changing flexible LED strip with self adhesive backing.
Single RGB LED chip allows programmable setting including static colours and colour changing modes, dependent on the control system used.
Requires 12V DC Constant Voltage LED driver.
35mm between LEDs (SMD5050).
Voltage drop of 2V per 5 metres.
Very low power consumption - 6W per metre.
3 year warranty.
IP68 low voltage RGB colour changing LED flexible strip light.Suitable for building features, stair/bar edging, floor marking, signage, marine and outdoor lighting.IP68 rating allows use in marine/boat applications.Single RGB LED chip allows programmable settings including static colours and colour changing modes dependant on the control system used.Cut point every 6 LEDs.For runs over 10m individual lengths should be connected in parallel*.Very low power consumption - 11W per metre.High flexibility.IP68 accessories and connector kits available.Non-dimmable.Please order to the nearest metre. (reel length 20m)
High density RGB colour changing flexible LED strip with self adhesive backing (must be applied to clean surfaces).Twice as many LEDs per metre as standard LED strip.Single RGB LED chip allows programmable settings including static colours and colour changing modes dependant on the control system used.Cut point every 100mm.17mm between LEDs (SMD5050).Voltage drop of 4V per 5m.For runs over 5m individual lengths should be connected in parallel*.Copper track for effective heat dissipation and long life.Requires 24V DC Constant Voltage LED driver.Very low power consumption - 14.4W per metre.Please order to the nearest metre. Prices per metre (Reel length 30m).3 Year Warranty - see www.auroralighting.com for details
Connector for joining AU-ST101RGB LED strip
Wired RGB connector for the connection of AU-ST101RGB led strips.Fitted with 20cm cable
Flexible inter-connection lead (20cm)for joining two pieces of AU-ST101RGB
Connector for joining RGB LED strip
Wired RGB connector for the connection of RGB strip.Fitted with 20cm cable
Flexible inter-connection lead (20cm)for joining two pieces of AU-ST224RGB
60W DMX RGB Sub Controller
90W DMX RGB Sub Controller
24V DC RGB Flexible High Density LED Strip Light. IP68.
High density RGB colour changing flexible LED strip.
Twice as many LEDs per meter as standard LED strip.
Requires 24V DC Constant Voltage LED driver.
17mm between LEDs (SMD5050).
Voltage drop of 4V per 5 metres.
Very low power consumption - 14.4W per metre.
IP68 rating allows use in marine/boat applications.
3 year warranty.
DMX control switch allows control of colour changing RGB strip or lamps in bars, restaurants and domestic applications.Three switches to select colour, dim / fade and 12 programmes including light to sound activation using the built-in microphone.Single static colour can be manually mixed and dimmed (almost any colour can be achieved).Colour changing time delay (5 seconds - 60 minutes) and fade speed (smooth fade or switching between colours) can be altered to suit the application.Use to control up to 30 x AU-DMX060 or AU-DMX090 RGB controllers.Includes DMX power supply.Fits a 35mm deep (minimum) 2 gang surface or recessed mounting box